Are you allowed to install a charging point yourself?

Yes — you may install the charger yourself behind your main meter, provided you work safely and follow the instructions. Any work inside the distribution board must be done by a certified electrician.

Is it safe to install a charging station yourself?

Yes, provided you isolate power before starting, follow the installation manual and app steps, and your board is in good condition. When in doubt, use a certified electrician.

Is it difficult to install a charging station yourself?

No — the charger is designed for simple DIY installation with clear step-by-step guidance. If anything looks unusual or non-standard, consult a certified electrician.

How long does it take to install a charging station yourself?

For a straightforward wall mount near the board, many homeowners complete it the same afternoon. Allow extra time for longer cable runs or a pole mount.

What tools do I need to install a charger myself?

Typically a wire stripper and a screwdriver to open the service cover. Power cables connect tool-free; mounting hardware may require basic hand tools depending on the surface.

Installatiejournaal Features a Hybrid EV Charger Installation

July 5, 2026

A different approach to EV charger installation

BlueBird Power has been featured by Installatiejournaal for its hybrid EV charger installation concept, developed to make home charging installations faster and more accessible.

As demand for home EV charging grows, installation capacity can become a limiting factor. The hybrid approach divides the work between a qualified installer and the homeowner, allowing installers to concentrate on the electrical work that requires their expertise.

How hybrid installation works

The certified installer handles the electrical work in the meter cupboard, routes the required power cable and performs the necessary safety checks.

The homeowner can then complete simpler tasks, such as mounting the charger and carrying out the initial configuration through the BlueBird Power app.

This approach can reduce the amount of time an installer needs to spend on-site. It may help lower installation costs while allowing professional installers to complete more projects. Customers should always follow local electrical regulations and use a qualified installer where required.

Installers interested in the system can learn more on the BlueBird Power installer page.

Smart charging in one connected system

Beyond installation, the charging system includes smart functions such as dynamic load balancing, solar charging and optional Vehicle-to-Grid readiness.

Through the BlueBird Power app, homeowners can manage charging sessions and configure the charger around their energy requirements. Remote management tools can also provide installers with better visibility and reduce unnecessary return visits.

Customers can choose the BlueSky Tethered Home Charger with a fixed cable or the BlueSky Socket Home Charger without a fixed cable.

Supporting the growth of electric mobility

By separating specialist electrical work from simpler mounting and configuration tasks, the hybrid EV charger installation model is intended to create a smoother experience for homeowners and installers.

Installatiejournaal’s coverage highlights how this approach could help the industry respond to growing demand while maintaining appropriate safety and installation standards. The article confirms that load balancing and solar charging are included, while V2G readiness is optional. Installatiejournaal